VEKA SOFTLINE 82 MD

Technical data and glazing

System depth

82 mm

Chambers

Multi-chamber; depending on the profile variant

Sealing

Centre sealing / 3 sealing levels

Glazing

up to 54 mm

Thermal performance

Uf as low as 1,0 W/m²K

Sound insulation

up to 47 dB

Security

up to RC2

The complete profile and accessory list requires VEKA professional partner access.

Frame extensions

Dimensions: extension height × profile depth. Match the element to the exact profile system, not just to a similar size.

• 30 × 82 mm

  The supplier's offer includes a version without steel reinforcement, in white and in walnut outside / white inside. The system manual also shows 30 × 15 × 1,5 mm reinforcement for this frame extension; whether it is used is determined by the structural design calculations.

  Supplier quotation · 2.76; KM OKNO bespoke quotation

• 15 × 82 mm

  A frame extension matching the full frame depth. The manual shows white and foil-laminated finishes.

  Manufacturer's catalogue · 2.76

• 45 × 82 mm

  Frame extension matching the full frame depth. The drawing shows 30 × 30 × 1,5 mm reinforcement.

  Manufacturer's catalogue · 2.76

• 100 × 82 mm

  A frame extension matching the full frame depth. The manual specifies 30 × 20 × 1,5 and 30 × 30 × 1,5 mm reinforcement sections for it.

  Manufacturer's catalogue · 2.76

Couplers, corner and tubular connections

• Mini coupling profile · 8 × 15 mm

  For vertical coupling; shown with a 2 mm joint gap in the drawing. It is not a structural reinforcement component.

  Manufacturer's catalogue · 2.106

• Coupling profile · 17,5 × 20 mm

  For vertical connections. The dimension refers to the individual coupling profile, not the full window frame depth.

  Manufacturer's catalogue · 2.106

• Coupling profile with provision for reinforcement · 82 × 20 mm

  Coupling profile matching the full system depth. The manual shows 50 × 10 × 1,5 mm and 50 × 10 mm steel inserts; the appropriate version depends on the load.

  Manufacturer's catalogue · 2.107

• Horizontal coupling profile · 14 × 35 mm

  For horizontal coupling only. The dimension is the manufacturer's profile designation, not the installed joint width.

  Manufacturer's catalogue · 2.107

• System coupling profile · with two small cover profiles

  Vertical, reinforced assembly. Cover profile: 8 × 45 mm; the overall depth shown is 98 mm with an 82 mm frame. Shown with 49 × 25 × 1,5 mm reinforcement and a spacer for 82 mm.

  Manufacturer's catalogue · 2.95

• System coupling profile · with large and small cover profiles

  Vertical assembly with 40 × 45 and 8 × 45 mm cover profiles. The total depth shown for the 82 mm frame is 130 mm, with 70 × 25 × 1,5 mm reinforcement and a system spacer.

  Manufacturer's catalogue · 2.96

• System coupling profile · with infill profile

  Vertical system joint with a large cover profile and a 20,5 × 22 mm infill profile. The drawing shows 70 × 25 × 1,5 mm reinforcement and a spacer for the 82 mm system.

  Manufacturer's catalogue · 2.97

• Horizontal system coupling profile · 49 × 76,1 mm

  For horizontal installation only, with a small or large cover profile. The 76,1 mm dimension refers to the individual component, not the frame's system depth; it forms a system together with the spacers, reinforcement and mounting plate for SOFTLINE 82.

  Manufacturer's catalogue · 2.98

• Horizontal reinforced coupling profile · 142 × 125 mm

  For horizontal connections only. The drawing shows 80 × 80 × 5 mm reinforcement. The manual lists this version as available on request.

  Manufacturer's catalogue · 2.100

• Two-piece coupling profile · 98 × 45 mm

  Vertical joint comprising outer and inner sections. The manual specifies 60 × 10 × 2 mm reinforcement, a spacer, an end cap and a mounting plate.

  Manufacturer's catalogue · 2.100

• 90° · 95 × 95 mm

  The manual explicitly specifies it for an 82 mm system depth. For vertical installation only, with 40 × 40 × 2 mm reinforcement and a fixing plate; listed as a version available on special request.

  Manufacturer's catalogue · 2.101

• Variable angle · 106 × 90 mm

  Round coupling profile and connecting profile combined. The 82 mm system also requires a 6 × 21 mm supplementary strip and a gasket. For vertical installation only; a range of 90–200° is listed for the version with foil on one side. The reinforcement and angle must be selected for each unit.

  Manufacturer's catalogue · 2.102

Accessory selection and documentation

The list shows items documented by manufacturer or supplier sources; it is not a comprehensive list of items currently available to order. The individual quotation specifies the selected colour, reinforcement and delivery terms.

Colours, finishes and aluminium cladding

The official SOFTLINE 76 MD and 82 MD pages list decorative foil, VEKA SPECTRAL finishes and external aluminium cladding. Regional availability to order depends on the VEKA fabricator programme.

30 featured finishes from 60+ manufacturer variants

• Classic white
• Black Feinstruktur
• Anthracite Grey Fine Texture
• Quartz grey fine texture
• Basalt Grey Feinstruktur
• Silver Grey Fine Texture
• Alux DB 703
• Anthracite Grey
• Brown
• Bog Oak
• Mahogany
• Walnut
• Golden Oak
• Fir green
• Moss green
• Agate Grey
• Slate grey
• Cream White
• Concrete Grey
• Brilliant blue
• Steel Blue
• Burgundy
• VEKA SPECTRAL anthracite ultramatt
• VEKA SPECTRAL graphite black ultramatt
• VEKA SPECTRAL umbra ultramatt
• VEKA SPECTRAL sepia brown ultramatt
• VEKA SPECTRAL pine green ultramatt
• VEKA SPECTRAL pure white ultramatt
• VEKA SPECTRAL Tender Oak Antique
• Sheffield Oak light

VEKA SPECTRAL lacquer finish

Factory-defined ultramatt colour range; not a freely selectable RAL paint finish.

Aluminium cladding can be ordered

Officially available for the SOFTLINE 76 and SOFTLINE 82 systems; can be anodised or powder-coated in any RAL colour.

Other VEKA systems

VEKA SOFTLINE 76 MD

Class A system with a centre gasket.

System depth

76 mm

Glazing

up to 48 mm

Product page and technical data

VEKA SOFTLINE 70 AD

Classic 5-chamber Class A system with gently rounded lines. For new builds and renovation, with two sealing levels.

System depth

70 mm

Glazing

up to 42 mm

Product page and technical data